Seac Console screen pressure gauge PSI

• Seac Screen is a dive computer with a large readable display, featuring adjustable contrast and brightness. All data is visible at a glance on a single screen.
• It's easy to manage all the functions of Seac Screen even with very thick gloves, thanks to the well-defined front buttons. The long strap is comfortable even over a dry suit.
• Main functions: Scuba (full dive management with Bühlmann ZHL-16C algorithm), Gauge (standalone management with depth gauge and timer), Freedive (time and depth for free divers).
• Manages 1 or 2 mixes (air, Nitrox and other mixes with O2 max 99%). Alerts for MOD violations, decompression stops, and excessive ascent rate alarms. Dive planner "NDL only".
• Records up to 40 hours of diving in Scuba/Gauge mode or 18 hours in Freedive mode. Data and firmware updates are downloadable via USB cable and the Seac Dive Manager app (available for free on ).

Seac Screen is the dive computer focused on clarity and ease of reading all data related to the dive profile. The large screen displays all relevant information on a single screen, with readable and distinct characters. Contrast and brightness can be adjusted, as well as the mode (automatic or manual) and the backlight duration (from 2" to 60"). The display measures 4x4.7cm and is protected by a solid rubber-coated shell. Dial dimensions are 6.7x7cm. The strap is long and designed to attach the Seac Screen even over a dry suit. Total length, from the loop's opposite end: approximately 36 cm. The two well-defined front buttons allow the Seac Screen to be used quickly and easily even with very thick gloves. Seac Screen operates in three modes: Scuba, Gauge, and Free. In Scuba mode, the dive profile is automatically managed according to the Bühlmann ZHL-16C decompression algorithm. It supports the management of 1 or 2 mixes (air, nitrox, and other blends with up to 99% O2), alerting the user at the appropriate time to make the change. Audible and visual alarms indicate decompression stop violations, excessive ascent rate, or exceeding the maximum depth allowed with the mixes used. In Gauge mode, the Seac Screen computer shows a depth gauge and timer for fully independent dive management for the most experienced divers. In Free mode, those practicing freediving can display surface and dive time, current depth, and maximum depth reached during the session. The dive planner of Seac Screen allows simulating and planning a dive by displaying the NDL time according to the target depth and other input data (mix, maximum PpO2, conservativeness level of the algorithm calculation). The logbook stores up to 40 hours of diving in Scuba/Gauge mode or 18 hours in Free mode. Data and firmware updates are downloadable via USB cable, and the free Seac Dive Manager app can be found on the site. Screen works with a non-rechargeable CR2450 battery. It can be replaced by the user, but it is advisable to contact an authorized SEAC to change even the original o-ring of the battery compartment. Other features: maximum depth of 100 meters, calculation times for no-fly and desaturation, maximum altitude alerts, selection of fresh or saltwater. Seac Screen is also available as a Console with the pressure gauge.